Featured Equipment
1982 Al-jon 550 High-Density 2-Ram Ferrous &Non-
Ferrous Scrap Baler with compression chamber door
• Charge Box Feed Opening: 6-1/2 feet wide x 10 feet long.
• Two 12" diameter cylinders (with 9" rods) for gathering and shear function
@ 310 tons total force
• One 12" diameter cylinder (with 9" rod) for compression @ 170 tons force
• One 7" cylinder (with 3" rod) to operate door @ 45 tons force
• Two 50-hp electric motors
• 80 second cycle time.
• Auto-cycle (designed for
continuous loading and out-put)
• Adjustable density pressure selector switch for compression cylinder
• Bale size: 16" x 10" x Variable (depending on density selection)
• Bale weights average 350 lbs.@ 90 to 100 lbs/cu.ft.
• Total Baler Gross Weight; 73,000 lbs.
Material that sticks out of the Hopper above the height of the ram where it meets
the shear on the forward stroke is sheared off and becomes part of the next bale.
This Baler is designed to produce bales that will achieve maximum load weights
in export containers.
Unit has been Refurbished, Cleaned, and Painted. It is currently under power.
No repairs are expected to be needed.
(Click on above Link to view Specifications)
